4. Remove the keyboard.
5. Remove the base cover.
6. Remove the RF switch board.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the dock I/O board.
10. Remove the rear I/O board.
11. Remove the express card reader.
12. Remove the inner frame.
13. Remove the GPS board.
14. Remove the smart card reader.
15. Remove the smart card reader I/O board.
16. Remove the fan.
17. Remove the heat-sink (UMA)
18. Remove the system board.
19. Remove the display bezel.
20. Remove the camera.
21. Remove the display hinges.
22. Remove the display cable.
About this task
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
Steps
After performing the preceding steps, you are left with the display panel.
Installing the display panel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Removing and installing components
97
To Next Page
Loading...
