NOTE: For instructions on how to find your computer's International Mobile Station Equipment Identity (IMEI) number,
search in the Knowledge Base Resource at www.dell.com/support.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing the 5G WWAN card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
NOTE: This procedure applies only to systems shipped with a 5G WWAN card installed.
NOTE: WWAN card is configured at point of sales for 2-in-1 computers, WWAN card upgrade (CUS Kit) is not available for
2-in-1 computers.
The following images indicate the location of the 5G WWAN card and provide a visual representation of the removal procedure.
Removing and installing components
35
To Next Page
Loading...
