Thermal module
Removing the thermal module
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
NOTE: The thermal module may become hot during normal operation. Allow sufficient time for the thermal module to cool
before you touch it.
NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the thermal module. The oils in your
skin can reduce the heat transfer capability of the thermal grease.
The following image indicates the location of the thermal module and provides a visual representation of the removal procedure.
Steps
1. For Latitude 7430 2-in-1 computers, use a plastic scribe to pry the system-board shield off the system board along with the
solid-state drive thermal plate, starting from the top-right side of the system-board shield.
Removing and installing components
45
To Next Page
Loading...
