Base cover
Removing base cover
1. Follow the procedure in Before working inside your computer.
2. To release the base cover:
a. Loosen the M2.5 x 6 captive screws (8) that secure the base cover to the computer [1].
NOTE: Exercise caution when loosening the screws. Angle the screwdriver to match the head of the front corners
of screw, to avoid a possible stripped screw head.
b. Use a plastic scribe to release the base cover from the edge and lift it from the computer [2].
CAUTION: Exercise caution when loosening the screws. Angle the screwdriver to match the head of the
screw (front corners on the laptop base cover) to avoid a possible stripped screw head.
3. Lift the base cover from the computer.
Disassembly and reassembly
13
To Next Page
Loading...
