Steps
1. Align and place the palm-rest assembly under the hinges of the display assembly.
2. Replace the six (M2.5x3) screws that secure the display assembly to the system.
3. Connect the display and camera cable to the connectors on the system board.
Next steps
1. Install the base cover.
2. Install the SIM card tray.
3. Install the SD card.
4. Follow the procedure in After working inside your computer.
Battery
Lithium-ion battery precautions
CAUTION:
● Exercise caution when handling Lithium-ion batteries.
38 Removing and installing components
To Next Page
Loading...
