NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your
computer.
2. Remove the SD card.
3. Remove the SIM card tray.
4. Remove the base cover.
5. Remove the WWAN card.
6. Remove the battery.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Steps
1. Remove the single (M1.6x1.8) screw that secure the right speaker.
2. Lift the right speaker off the system.
Installing the right speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Removing and installing components
45
To Next Page
Loading...
