4. Remove the screws that secure the display hinge at the front of the computer. Press and remove the
display hinge from the computer.
Installing the Display Hinge
1. Place the display hinge on the computer.
2. Tighten the screws to secure the display hinge at the front and back of the computer.
3. Install:
a. keyboard
b. keyboard trim
c. base cover
d. battery
4. Follow the procedures in After Working Inside Your Computer.
Removing the Palmrest
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
f. memory
g. optical drive
h. hard drive
i. display hinge
3. Remove the screws at the bottom of the computer.
24
To Next Page
Loading...
