f. display hinge
g. palmrest
3. Perform the following steps:
a. Remove the screws that secure the ExpressCard cage.
b. Lift and remove the ExpressCard cage from the computer.
Installing the ExpressCard Cage
1. Align the ExpressCard cage to its original position on the computer and snap it into place.
2. Install the screws that secure the ExpressCard cage to the system board.
3. Install:
a. palmrest
b. display hinge
c. keyboard
d. keyboard trim
e. base cover
f. battery
g. SD card
4. Follow the procedures in After Working Inside Your Computer.
Removing the System Fan
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
f. memory
g. optical drive
h. hard drive
i. display hinge
j. palmrest
29
To Next Page
Loading...
