Installing the I/O Board (Right)
1. Place the I/O board on the computer.
2. Tighten the screws to secure the I/O board to the computer.
3. Install:
a. system board
b. ExpressCard cage
c. system fan
d. palmrest
e. display hinge
f. WLAN card
g. hard drive
h. optical drive
i. memory
j. keyboard
k. keyboard trim
l. base cover
m. battery
n. SD card
4. Follow the procedures in After Working Inside Your Computer.
Removing the Power Connector
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
f. memory
g. hard drive
h. optical drive
i. WLAN card
37
To Next Page
Loading...
