Dell OptiPlex 3050 Small Form Factor User Manual

Installing the expansion card
1. Insert the expansion card into the connector on the system board.
2. Press the expansion card until it clicks into place.
3. Close the expansion card latch and press it until it clicks into place.
4. Install the cover.
5. Follow the procedure in After working inside your computer.
Coin cell battery
Removing coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
3. To remove the coin cell battery:
a. Press the release latch until the coin cell battery pops out [1].
b. Remove the coin cell battery from the connector on the system board [2].
12
Removing and installing components

Dell OptiPlex 3050 Small Form Factor Specifications

General

Brand	Dell
Model	OptiPlex 3050 Small Form Factor
Category	Desktop
Language	English