Optical drive
Removing the optical drive
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. cover
b. bezel
c. hard drive and optical drive module
3. To remove the optical drive:
a. Remove the screws that secure the optical drive from the module [1].
b. Pull the optical drive away from the module [2].
Installing the optical drive
1. Slide the optical drive into the optical drive module.
2. Replace the screws that secure the optical drive to the module.
3. Install the:
a. hard drive and optical drive module
b. bezel
c. cover
4. Follow the procedure in After working inside your computer.
Removing and installing components
19
To Next Page
Loading...
