5. Install the SD card.
6. Follow the procedure in After working inside your computer.
Hinges
Removing the hinges
Prerequisites
NOTE: This procedure is applicable for systems with a plastic chassis only.
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the hinge caps.
7. Remove the display bezel.
About this task
The following images indicate the location of the hinge caps and provide a visual representation of the installation procedure.
74
Removing and installing components
To Next Page
Loading...
