Replacing the audio daughter-
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Turn the audio daughter-board over and place the audio daughter-board into the
slot on the system board.
2 Replace the screw (M2x3) that secures the audio daughter-board to the system
board.
Post-requisites
1 Replace the system board.
2 Replace the memory modules.
3 Replace the heat-sink assembly.
4 Replace the fans.
5 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
6 Replace the hard drive.
7 Replace the wireless card.
8 Replace the battery (half-length) or the battery (full-length).
9 Replace the base cover.
66
To Next Page
Loading...
Need help?
General
