Dell P56F - Replacing the Palm-Rest Assembly; Procedure; Post-Requisites

Replacing the palm-rest
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
Place the palm-rest assembly on a clean and at surface.
Post-requisites
1 Replace the keyboard.
2 Replace the system board.
3 Replace the power-adapter port.
4 Replace the display assembly.
5 Replace the fans.
6 Replace the heat-sink assembly.
7 Replace the speakers.
8 Replace the wireless card.
9 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
10 Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.
11 Replace the memory modules.
12 Replace the battery (half-length) or the battery (full-length).
13 Replace the base cover.
95