Dell PowerConnect 5324 - Crypto Certificate Generate; Sntp Broadcast Client Enable; Permit (Management)

PowerConnect 5324 Release Notes
System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 18
• remove vlan-list—List of VLAN IDs to
remove. Separate non consecutive
VLAN IDs with a comma and no
spaces. A hyphen designate a range
of IDs.
adds all configured VLAN IDs.
♦ remove vlan-list—List of VLAN IDs to
remove. Separate non consecutive VLAN
IDs with a comma and no spaces. A hyphen
designate a range of IDs. The option all
removes all configured VLAN IDs.
crypto certificate generate
Update the command as follows:
Field Current Guide Change to:
Syntax
Parameter
crypto certificate [number] generate [key-
generate [length]] [passphrase string] [cn
common- name] [ou organization-unit] [o
organization] [l location] [st state] [c
country] [duration days]
crypto certificate [number] generate [key-
generate [length]] [cn common- name] [ou
organization-unit] [o organization] [l location] [st
state] [c country] [duration days]
Syntax
Parameter
passphrase string—Passphrase that is
used for exporting the certificate in
PKCS12 file format. If unspecified the
certificate is not exportable. (Range: 8 -
96)
Delete the parameter
sntp broadcast client enable
Change a parameter description:
Current Guide Change to:
User
Guideline
Use the sntp client enable Interface
Configuration mode command to enable the
SNTP client on a specific interface.
Use the sntp broadcast client enable
Interface Configuration mode command to
enable the SNTP client on a specific
interface.
permit (management)
Change a parameter description:
Current Guide Change to:
User
Guideline
The system supports up to 256 management
access rules.
The system supports up to 128
management access rules.