Dell PowerConnect W-Airwave - ARM Traps; Ensuring that IDS & Auth Traps Display in AWMS Using CLI

24 | AWMS and Dell PowerConnect W Integration Strategies Dell PowerConnect W AirWave 7.2 | Best Practices Guide
 wlsxValidSSIDViolation
 wlsxStaPolicyViolation
 wlsxRepeatWEPIVViolation
 wlsxWeakWEPIVViolation
 wlsxFrameRetryRateExceeded
 wlsxFrameReceiveErrorRateExceeded
 wlsxFrameFragmentationRateExceeded
 wlsxFrameBandWidthRateExceeded
 wlsxFrameLowSpeedRateExceeded
 wlsxFrameNonUnicastRateExceeded
 wlsxChannelRateAnomaly
 wlsxNodeRateAnomalyAP
 wlsxNodeRateAnomalySta
 wlsxEAPRateAnomaly
 wlsxSignalAnomaly
 wlsxSequenceNumberAnomalyAP
 wlsxSequenceNumberAnomalySta
 wlsxApFloodAttack
 wlsxInvalidMacOUIAP
 wlsxInvalidMacOUISta
 wlsxStaRepeatWEPIVViolation
 wlsxStaWeakWEPIVViolation
 wlsxStaAssociatedToUnsecureAP
 wlsxStaUnAssociatedFromUnsecureAP
 wlsxAPImpersonation
 wlsxDisconnectStationAttackAP
 wlsxDisconnectStationAttackSta
ARM Traps
 AP Power Change
 AP Mode Change
 AP Channel Change
Ensuring That IDS & Auth Traps Display in AWMS Using CLI
Validate your Dell PowerConnect ArubaOS configuration by exiting the configure terminal mode and issue the
following command:
(Controller-Name) # show snmp trap-list