Dell PowerEdge M630p - Page 26

Memory Settings on page 35
Processor Settings on page 36
SATA Settings on page 38
Integrated Devices on page 41
Serial Communication on page 43
System Profile Settings on page 44
Miscellaneous Settings on page 46
iDRAC Settings utility on page 47
Device Settings on page 48
Related tasks
Viewing System BIOS on page 26
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related References
System BIOS on page 25
System BIOS Settings details on page 26
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System
Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor
Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
Boot Settings Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot settings.
Network Settings Specifies options to change the network settings.
Integrated Devices Specifies options to manage integrated device controllers and ports and specify related features and options.
Serial
Communication
Specifies options to manage the serial ports and specify related features and options.
System Profile
Settings
Specifies options to change the processor power management settings, memory frequency, and so on.
26 Pre-operating system management applications