1-10 User’s Guide
www.dell.com | support.dell.com
Color temp:
User:
User R:
User G:
User B:
6500:
9300:
Color temperature for standard 9300, 6500 or user defined.
Red signal gain by user defined.
Green signal gain by user defined.
Blue signal gain by user defined.
Set CIE coordinate at 6500°K color temperature.
Set CIE coordinate at 9300°K color temperature.
Exit: Exit OSD menu function.
Sharpness: Adjust the scale-up effect (smoother or sharper).
OSD transparency: Adjust transparency level from OSD menu. The range
is from 0 to 100 scales.
1024 x 768: Current mode resolution.
59.8 HZ: Current mode vertical frequency ±1 Hz.
VER 0.05MH: Firmware revision.
Other features:
Intellectual-Auto:
The auto-adjustment function starts automatically when a display mode is
input for the first time. After adjustment, this mode is saved. The monitor
switches to the optimized condition automatically whenever this mode is
encountered again. A total of 21 recently used modes are recorded into
this system.
VESA DPMS
Functionality: When signaled by the host system, the monitor displays a black screen for
about 3 seconds. After 3 seconds, if the monitor receives no further signal,
it will display "No Signal" and then enter the power saving mode.
Table 1-7. LED Indicators
Mode LED color
On Full bright < blue >
Stand-by Half bright < blue >
Suspend Half bright < blue >
Off Dark
Button power off Dark
Cable disconnection 1. Half bright < blue > <Sleep mode>
2. Dark <DC power off; Off mode>
Table 1-6. OSD Description
(continued)
To Next Page
Loading...
