EasyManua.ls Logo

Dell PowerEdge T560 - GPU Specifications; Ports and Connectors Specifications; NIC Port Specifications; Serial Connector Specifications

Dell PowerEdge T560
259 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GPU specifications
Th
e PowerEdge T560 system supports up to two 300 W double-width GPUs or six 75 W single-width GPUs .
NOTE: Systems configured with GPUs will have higher fan acoustics.
Ports and connectors specifications
NI
C port specifications
The PowerEdge T560 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports embedded on
the LAN on Motherboard (LOM) and integrated on the optional Open Compute Project (OCP) cards.
Table 18. NIC port specification for the system
Feature Specifications
LOM on Planar 2 x 1 GbE
OCP card 1 x OCP x8 3.0
Serial connector specifications
Th
e PowerEdge T560 system supports one optional card type serial connector, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant .
The optional serial connector card is installed similar to an expansion card filler bracket.
Ports specifications
Table 19. PowerEdge T560 port specifications
Front Rear Internal (Optional)
Port type No. of ports Port type No. of ports Port type No. of ports
1 x USB 2.0-
co
mpliant port
One 1 x Dedicated
iDRAC (RJ45)
port
One Internal USB 3.0-
compliant port
One
1 x USB 3.0-
compliant port
One 1 x USB 2.0-
compliant port
One
1 x iDRAC Direct
(Micro-AB USB)
port
One 1 x USB 3.0-
compliant port
One
DB-15 VGA port One
NOTE: The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port.
Video specifications
Th
e PowerEdge T560 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Technical specifications 39

Table of Contents

Related product manuals