Steps
1. A
lign the fan board tray to the guide pins on the system, slide the tray to the left of the system to lock it in place.
2. Tighten the captive screw to secure the fan board tray to the system.
Figure 34. Installing the fan board tray
Ne
xt steps
1. Connect the cables to the fan board.
2. Install the cooling fan assembly.
3. Install the air shroud.
4. Follow the procedure listed in After working inside your system.
Removing the cooling fan cage
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system .
3. Remove the air shroud.
Steps
1. Lift the blue release levers to unlock the cooling fan cage assembly from the system.
2. Hold the release levers, and lift the cooling fan cage assembly away from the system.
90 Installing and removing system components
To Next Page
Loading...
