8. FAN_SIG1
9
. FAN6
10. FAN_PWR
11. FAN5
Removing the fan board tray
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system .
3. Remove the air shroud.
4. Remove the cooling fan cage.
5. Disconnect the cables that are connected to the fan board.
Steps
1. Loosen the captive screw and slide the fan board tray to the right of the system to disengage it from the chassis.
2. Lift the fan board tray out of the system.
Figure 33. Remove the fan board tray
Ne
xt steps
Replace the fan board tray.
Installing the fan board tray
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system .
3. Remove the air shroud.
4. Remove the cooling fan assembly .
5. Disconnect the cables that are connected to the fan board.
Installing and removing system components 89
To Next Page
Loading...
