Optional front bezel
Re
moving the front bezel
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Keep the bezel key handy.
NOTE: The bezel key is part of the security bezel package.
Steps
1. Unlock the bezel.
2. Pull from the top end of the bezel to disengage it from the system.
3. Unhook the bezel tabs from the slots at the bottom of the system to remove the bezel from the system.
Figure 22. Removing the front bezel
Ne
xt steps
Installing the front bezel.
Installing the front bezel
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions .
2. Locate and remove the bezel key.
NOTE: The bezel key is part of the security bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
Installing and removing system components 79
To Next Page
Loading...
