Figure 36. Installing the cooling fan assembly
Ne
xt steps
1. Install the air shroud.
2. Follow the procedure listed in After working inside your system.
Removing a cooling fan
The procedure for removing a standard and a high-performance fan is identical.
Prerequisites
NOTE:
Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
u
tmost care while removing or installing cooling fans.
CAUTION:
T
he cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only
one fan at a time.
1. F
ollow the safety guidelines listed in S
afety instructions.
2. Follow the procedure that is listed in Before working inside your system .
Steps
Press the release tab and lift the cooling fan out of the cooling fan cage.
92 Installing and removing system components
To Next Page
Loading...
