Dell PowerEdge T560 - Installing and Removing System Components; Safety Instructions

Installing and removing system components
To
pics:
• Safety instructions
• Before working inside your system
• After working inside your system
• Recommended tools
• Optional front bezel
• System feet
• Optional caster wheels
• System cover
• Air shroud
• Cooling fans
• Cable routing
• Front PERC module
• Drives
• Drive backplane
• Drive bays
• Optional optical drive
• Optional tape backup unit
• Front IO module
• System memory
• Optional BOSS-N1 module
• Optional internal USB card
• Expansion cards and expansion card risers
• Optional GPU card
• GPU riser
• Processor and heat sink
• Optional OCP card
• Optional serial COM port
• System battery
• Intrusion switch
• Power supply unit
• Power interposer board
• System board
• Trusted Platform Module
Safety instructions
NOTE: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
y
ourself.
CAUTION: E
nsure that two or more people lift the system horizontally from the box and place it on a flat
surface, rack lift, or into the rails.
WARNING: O
pening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
WARNING: D
o not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
7
Installing and removing system components 77