Dell PowerEdge T560 - Page 63

Integrated Devices
To
view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 59. Integrated Devices details
Option Description
User Accessible USB Ports Configures the user accessible USB ports. Selecting On
ly Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports. Selecting Only Back Ports On disables the front USB
ports; selecting All Ports Off disables all front and back USB ports; selecting
All Ports Off (Dynamic) disables all front and back USB ports during
POST.Selecting All Ports Off disables all front and back USB ports; selecting
All Ports Off (Dynamic) disables all front and back USB ports during POST.
Selecting All Ports Off disables all front and back USB ports.This option is
set to All Ports On by default. When user accessible USB ports are set to All
Ports Off (Dynamic) the Enable Front Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the operating system runtime.
The USB keyboard and mouse still function in certain USB ports during the
bo
ot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Internal USB Port Enables or disables the internal USB port. This option is set to On or Off. This
option is set to On by default.
NOTE:
The Internal USB port is on the PCIe riser 1b.
iDRAC Direct USB Port The iDRAC Direct USB port is managed by iDRAC exclusively with no host
v
i
sibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Integrated Network Card1 Enables or disables the integrated network card. When this option is set to
Enabled, the card is not available to the operating system. This option is set to
On by default.
NOTE:
If set to Disabled (operating system), the Integrated NICs might
s
till be available for shared network access by iDRAC.
Embedded NIC1 and NIC2Embedded
N
I
C1, NIC2, NIC3 and NIC4 Embedded
NIC1 Integrated RAID controller
Enables or disables the Embedded NIC1 and NIC2. If set to
Disabled (OS), the NIC may still be available for shared network access by the
embedded management controller.
Configure the
Embedded NIC1 and NIC2 option by using the NIC management utilities of
the system. This option is set to
Enabled by default.
Enables or disables the Embedded NIC1 and NIC2. If set to
Disabled (OS), the NIC may still be available for shared network access by the
embedded management controller.
Configure the
Embedded NIC1, NIC2, NIC3 and NIC4 option by using the NIC management
utilities of the system. This option is set to
Enabled by default.
Enables or disables the Embedded NIC1. If set to
Disabled (OS), the NIC may still be available for shared network access by the
embedded management controller. Configure the
Embedded NIC1 option by using the NIC management utilities of the system.
This option is set to
Enabled by default.
Pre-operating system management applications 63