PowerVault (Dell MD1400) Setup Guide
Install PowerVaults and 15-Drive DACs on a Series 5 or Series 6 Host
(Mixed Mode) 42
Minimum NetWitness Platform Software Versions 42
Introduction 42
High-Level Procedure 43
NetWitness Platform 11.3 and Later 43
NetWitness Platform 11.2 and Earlier 43
Connect External Storage Devices to RSA Series 5 or Series 6 Archiver, Decoder, or Log
Decoder Hosts 44
Connect External Storage Devices to Series 5 (R630) 44
Connect External Storage Devices to Series 6 (R640) 46
Run the External Storage Script on the Decoder, Log Decoder, or Archiver 48
Restart the Service 55
Install PowerVault on Core Appliance Used as a Hybrid 56
Prerequisites 56
Introduction 57
High-Level Procedure 57
NetWitness Platform 11.3 and Later 57
NetWitness Platform 11.2 and Earlier 58
Connect PowerVaults to a Core Physical Host Used as a Hybrid 59
Run the PowerVault Installation Scripts on an R603 or R640 Used as a Hybrid 63
Restart the Services 67
4
To Next Page
Loading...
