Steps
1. Align the tabs on the side cover with the slots on the chassis.
2. Press the side cover towards the side of the computer to install it.
3. The release latch automatically locks the side cover to the computer.
4. Tighten the single captive screw to secure the side cover to the computer.
Next steps
1. Follow the procedure in after working inside your computer.
Front bezel
Installing the front bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the front bezel and provides a visual representation of the installation procedure.
14
Removing and installing components
To Next Page
Loading...
