Steps
1. Disconnect the data and power cables from the 3.5-inch hard-disk drive module.
2. Press the securing tabs to release the hard-disk drive assembly from the chassis.
3. Slide the hard-disk drive assembly away from the chassis.
Removing the 3.5-inch hard-disk drive bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the 3.5-inch hard-disk drive assembly.
About this task
The following images indicate the location of the 3.5-inch hard-disk drive bracket and provides a visual representation of the
removal procedure.
18
Removing and installing components
To Next Page
Loading...
