Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the connectors on your system board.
1. Intrusion switch connector 2. CPU
3. ATX CPU power connector : 1 and 2 4. Memory module slots
5. SATA power connector 6. M2 SSD slot
7. Coin cell battery 8. System fan connector 1
9. Power remote connector 10. Power switch connector
11. Intrusion speaker connector 12. WLAN slot
13. System fan connector 2 14. Internal USB connector
15. SATA 4 connector 16. SATA 3 connector
17. SATA 2 connector 18. SATA 1 connector
78 Removing and installing components
To Next Page
Loading...
