About this task
The following image indicates the location of the chassis front fan cage and provide a visual representation of the installation
procedure.
Steps
1. Insert the rubber grommets on the fan cage.
2. Align the slots on the fan with the rubber grommets on the fan cage.
3. Route the rubber grommets through the slots on the fan and pull the rubber grommets until the fan snaps into position.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Installing the front fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the chassis fan and provide a visual representation of the installation procedure.
64
Removing and installing components
To Next Page
Loading...
