Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Removing the M.2 2280 solid state drive
Prerequisites
NOTE: For computers shipped with M.2 2280 solid state drive.
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The figure indicates the location of the M.2 2280 solid state drive and provides a visual representation of the removal
procedure.
Steps
1. Remove the (M2x2) screw that secures the SSD thermal plate to the M.2 2280 solid state drive.
2. Lift to remove the SSD thermal plate away from the computer.
3. Lift the M.2 2280 solid state drive at an angle and slide to remove from its slot on the system board.
Installing the M.2 2280 solid state drive
Prerequisites
NOTE: For computers shipped with M.2 2280 solid state drive.
If you are replacing a component, remove the existing component before performing the installation procedure.
Removing and installing components
23
To Next Page
Loading...
