About this task
The figure indicates the location of the M.2 2280 solid state drive and provides a visual representation of the installation
procedure.
Steps
1. Carefully align and insert the M.2 2280 solid state drive to its slot on the system board.
2. Replace the (M2x2) screw that secures the SSD thermal plate to the M.2 2280 solid state drive.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Left fan
Removing the left fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the left fan and provide a visual representation of the removal procedure.
24
Removing and installing components
To Next Page
Loading...
