2. Remove the base cover.
About this task
The following images indicate the location of the right fan and provide a visual representation of the removal procedure.
Steps
1. Carefully peel off the tweeter speaker from its compartment next to the fan connector to create more space to disconnect
the fan cable.
2. Disconnect the right fan cable from the system board.
3. Remove the two (M2x4) screws that secure the right fan to the palm-rest and keyboard assembly.
4. Lift the fan from its outer edge and slide it away from the palm-rest and keyboard assembly.
Installing the right fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Removing and installing components
27
To Next Page
Loading...
