About this task
The following images indicate the location of the right fan and provide a visual representation of the installation procedure.
Steps
1. Align the screw holes on right fan with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two (M2x4) screws that secure the right fan to the palm-rest and keyboard assembly.
3. Connect the right fan cable to the system board.
4. Adhere the tweeter speaker in its compartment on the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
28
Removing and installing components
To Next Page
Loading...
