Steps
1. Align the screw holes on left fan with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two (M2x4) screws that secure the left fan to the palm-rest and keyboard assembly.
3. Connect the left fan cable to the system board.
4. Adhere the tweeter speaker in its compartment on the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Right fan
Removing the right fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
26
Removing and installing components
To Next Page
Loading...
