Dell S2725DS - Back view

About your monitor │ 13
Back view
6
8
7
5
4
1
3
2
Label Description Use
1 Side I/O cover Use to cover side I/O.
2 Joystick Use to control the OSD menu. For more information,
see Operating your monitor.
3 Power On/Off
button
Press the power button to turn the monitor on and
off.
4 Cable
management guide
Use to organize cables by routing them through the
guide.
5 VESA mounting
holes (100 mm x
100 mm - behind
the VESA cover)
Wall-mount the monitor using VESA-compatible wall-
mount kit.
NOTE: Wall-mount kit is not shipped with
your monitor and is sold separately.
6 Regulatory
information label
Lists the regulatory approvals.
7 Regulatory label
(including barcode,
serial number and
Service Tag label)
Lists the regulatory approvals. Refer to this label
if you need to contact Dell for technical support.
The Service Tag is a unique alphanumeric identifier
that enables Dell service technicians to identify the
hardware components in your computer and access
warranty information.
8 Stand release
button
Releases the stand from the monitor.