Dell S2725DS - OSD warning messages

Operating your monitor │ 63
OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
The current input timing is not supported by the monitor display.
Please change your input timing to 2560x1440, 100Hz or any other
monitor listed timing as per the monitor specications.
This message indicates that the monitor cannot synchronize with the signal that it
is receiving from the computer. See Monitor specifications for the Horizontal and
Vertical frequency ranges addressable by this monitor. The recommended mode is
2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
When you adjust the Brightness level above the default level for the first time, the
following message appears:
Adjusting to this value will increase power consumption above the default level.
Do you want to continue?
Yes
No
NOTE: If you select Yes, the message will not appear the next time you
change the brightness setting.