40 │ Setting up the monitor
Attaching the side I/O-cover
To attach the side I/O-cover:
• Align and place the tabs on the side I/O-cover with the slots on the display
back-cover.
• Press the side I/O-cover to snap it into place.
Organizing cables
Install the cable management guide.
Route the cables through the cable management guide on the stand riser.
After connecting all necessary cables to your monitor and computer, (see
Connecting your monitor for cable attachment) organize all cables as shown in the
image.
If your cable is not able to reach your computer, you may connect directly to the
computer without routing through the cable management guide on the monitor
stand.
To Next Page
Loading...
