Dell U3425WE - Page 68

68  │  Operating the monitor
Auto Select Automatically scans for available input sources. The
default is On. Press the joystick to confirm the
selection.
Options for
Thunderbolt
Allows you to set this function to:
• Prompt for Multiple Inputs: Always displays the
“Switch to Thunderbolt Video Input” message
for you to choose whether to switch or not.
• Always Switch: Always switches to Thunderbolt
video input (without asking) when the Thunderbolt
cable is connected.
• Off: Never automatically switches to Thunderbolt
video input when the Thunderbolt cable is
connected.
Press the joystick to confirm the selection.
NOTE: When Auto Select is set to Off, this function is
not available.
Options for
DP/HDMI
Allows you to set this function to:
• Prompt for Multiple Inputs: Always displays the
“Switch to DP/HDMI Video Input” message for
you to choose whether to switch or not.
• Always Switch: Always switches to DP/HDMI
video input (without asking) when the DisplayPort or
HDMI cable is connected.
• Off: Never automatically switches to DP/HDMI
video input when the DisplayPort or HDMI cable is
connected.
Press the joystick to confirm the selection.
NOTE: When Auto Select is set to Off, this function is
not available.
Reset Input
Source
Resets your monitor input settings to the factory
settings.