Operating the monitor │ 67
Reset
Brightness/
Contrast
Resets all settings under the Brightness/Contrast
menu to the factory preset values.
Input Source Select between the different video signals that may be
connected to your monitor.
Thunderbolt
(90W)
Select Thunderbolt (90W) when you are using the
Thunderbolt™ 4 upstream port. Press the joystick to
con
firm the selection.
DP Select DP whe
n you are using the DisplayPort (DP)
connector. Press the joystick to confirm the selection.
HDMI Select HDM
I when you are using the HDMI connector.
Press the joystick to confirm the selection.
Rename Inputs Allows you to specify a preset input name for the
se
lected input source. The preset options are PC, PC 1,
PC 2, La
ptop, Laptop 1, and Laptop 2. The default
setting is Off.
NOTE: When y
ou perform a rename for the
Thunderbolt (90W) input, the wattage value remains
after the specified option, e.g., PC 1 (90W).
NOTE: It is no
t applicable for the input names shown in
the warning messages and Display Info.
To Next Page
Loading...
