90 │ Operating the monitor
The OSD functions only in the normal operation mode. If you press the joystick
during the Standby mode, the following message will appear depending on the
selected input:
Activate the computer and the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the
connected input signal.
If Thunderbolt, DisplayPort, or HDMI input is selected and the corresponding cable
is
not connected, the following message will appear:
NOTE: The message may be slightly different according to the selected
input signal.
See Troub leshooting for more information.
To Next Page
Loading...
