Operating the monitor │ 89
When you switch the USB Switch from PC 1 to PC 2, and Ethernet Switch
Mode is set to Prompt when KVM switches, the following message appears:
When the monitor is under DP/HDMI input and the Thunderbolt or USB Type-C
cable is connected to a notebook that supports DP Alternate Mode, if Options for
Thunderbolt is set to Pr
ompt for Multiple Inputs, the following message
appears:
When the monitor goes into Standby mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
To Next Page
Loading...
