Next steps
1 Install the battery
2 Install the base cover
3 Install the optical drive
4 Install the micro SD card
5 Follow the procedure in after working inside your computer
Solid-state drive/Intel Optane memory module
Removing the M.2 2280 Solid-state drive or Intel Optane
memory - Optional
Prerequisites
1 Follow the procedure in before working inside your computer
2 Remove the micro SD card
3 Remove the optical drive
4 Remove the base cover
5 Remove the battery
Steps
1 Loosen the captive screw that secures the thermal plate to the palmrest and keyboard assembly [1].
2 Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [2].
3 Slide and remove the thermal plate from the solid-state drive/Intel Optane slot [3].
4 Slide and lift the solid-state drive/Intel Optane o the palmrest and keyboard assembly [4].
30
Removing and installing components
To Next Page
