Next steps
1 Install the display bezel
2 Install the display assembly
3 Install the WLAN
4 Install the battery
5 Install the base cover
6 Install the optical drive
7 Install the micro SD card
8 Follow the procedure in after working inside your computer
Display hinges
Removing the display hinges
Prerequisites
1 Follow the procedure in before working inside your computer
2 Remove the micro SD card
3 Remove the optical drive
4 Remove the base cover
5 Remove the battery
6 Remove the WLAN
7 Remove the system fan
8 Remove the display assembly
9 Remove the display bezel
10 Remove the display panel
Steps
1 Remove the eight (M2.5x2.5) screws and two (M2x2) screws that secure the hinges to the display back-cover and antenna assembly
[1, 2].
2 Lift the hinges and brackets o the display back-cover and antenna assembly [3].
Removing and installing components
85