Next steps
1. Replace the micro SD card
2. Follow the procedure in after working inside your computer
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the SD memory card
3. Remove the optical drive assembly
Steps
1. Loosen the three captive screws [1].
2. Remove the single (M2x4) screw, two (M2x2) screws, and six (M2.5x7) screws that secure the base cover to the palmrest and
keyboard assembly [2, 3, 4].
14
Removing and installing components
To Next Page
Loading...
