Table 28. System Setup options—Connection menu
Connection
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
HTTP(s) Boot Feature
HTTP(s) Boot When enabled, supports HTTP(s) boot on the client BIOS, which offers wired or
wireless and HTTP/HTTPS connection options.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
HTTP(s) Boot Modes In Auto Mode, the boot URL is obtained from the DHCP response; the boot URL
specifies the HTTP Boot Server and location of the Network Boot Program (NBP)
file. In Manual mode, the user enters the URL in the text box, which must start
with http:// or https:// and end with the NBP file name.
By default, Auto Mode is selected.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
CA Certificate Upload or delete the CA certificate.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Table 29. System Setup options—Storage menu
Storage
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
Drive Information Displays the information of onboard drives.
Table 30. System Setup options—Display menu
Display
Display Brightness
Brightness on battery power Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
90 BIOS Setup
To Next Page
Loading...
