NOTE: The system board can be replaced with the following components attached:
● Heat sink
● Fans
● Solid state drive
2. Install the battery.
3. Install the base cover.
4. Follow the procedure in After working inside your computer.
Keyboard
Removing the keyboard
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working in your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the system board.
NOTE:
The system board can be removed with the following components attached:
● heat sink
● fans
● solid-state drive
5. Remove the power button with fingerprint reader.
About this task
The following images indicate the location of the keyboard and provide a visual representation of the removal procedure.
74
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
