Delo DELOLUXcontrol - 5 Shipping, Packaging and Storage; Safety Instructions for Transport; Receiving Inspection; Identifi Cation and Completeness

20
Shipping, packaging and storage
5 Shipping, packaging and storage
5.1 Safety instructions for transport
Unauthorized transport
ATTENTION!
Damage from unauthorized transport!
Transport or shipping by untrained personnel can damage the device.
Therefore:
 Transport internally or return for repair and maintenance only in the
original packaging (hard top case).
 Shocks should be prevented.
 Never let the device fall down onto the fl oor or the work bench.
 DELO cannot be held liable for damage resulting from
defective packaging.
 Do not bend the metal sheathing of the detector head line (minimum
bending radius 100 mm).
 Do not subject the signal line to torsional or tensile stress.
Storage
The device must be stored in a cool and dry place.
5.2 Receiving inspection
Check the shipment for completeness and shipping damage immediately upon receipt. If
any external shipping damage is visible, proceed as follows:
 Accept the shipment only conditionally or not at all.
 Note down the extent of damage on the transport documents or the delivery note of
the forwarding agent.
 File a complaint.
5.3 Identifi cation and completeness
The device is identifi ed by the designation and order number on the type plate.
Depending on the ordered combination, the complete product as delivered includes:
 One hard top case
 One DELOLUXcontrol display unit
 One USB connection cable
 One socket wrench with 3 counter sunk screws M3x6 (not included in the package of
the 9 mm LED sensor)
 Operating instructions
 One CD-ROM (LabVIEW example software, DLL USB fi le, operating instructions)
 Depending on the equipment: One or several detector heads, the corresponding
adapters and the factory calibration report