14
9. Remove the cleaning accessory, and wash the portalter
and the lter under running water.
10. Attach the portalter again and run a rinse cycle by press-
ing the OK button: it is advisable to place a container under
the portalter.
11. Once the rinse has been completed, the machine is ready
for use.
12. Remove and empty the drip tray.
Please note:
• The cleaning cycle can be started up at any time (even if the
relative indicator is not yet on).
• Should the cleaning cycle be started by mistake, press the
button and hold for 10 seconds; the rinse cannot be
stopped.
• After 30 seconds without a button being pressed, the ma-
chine exits the cleaning cycle automatically.
13. EXPLANATION OF INDICATORS
INDICATORS EXPLANATION OF INDICATORS OPERATION
All lights blink briey Turning the machine on Self-diagnosis
permanently alight
The machine has been turned on for the
rst time and the water circuit must be
lled
Proceed as indicated in section [manca tag]
“3. Setting up the machine”
permanently alight
(white)
• 1x - 2x indicators: the number of cups
must be selected
• light: indicates the selected coee
temperature
• indicator: indicates the ma-
chine is ready to deliver hot water
• Hot drink indicator: indicates the drink
selected
The machine is ready to deliver hot
drinks
Set up the machine and proceed with prepa-
ration of the drink
permanently alight
(blue)
• 1x - 2x indicators: the number of cups
must be selected
• indicator: indicates the ma-
chine is ready to deliver hot water
• Cold drink indicator: indicates the
drink selected
The machine is ready to deliver cold
drinks
Set up the machine and proceed with prepa-
ration of the drink
permanently alight
The beans hopper(A2) is empty Fill the beans hopper
blinking
The grinding function has been select-
ed, but the beans hopper(A2) is empty
Fill the beans hopper
permanently alight
There is not enough water in the tank
(A15) or the tank is not correctly in place
Fill the tank with water, or remove the tank
and reposition it correctly
→
To Next Page
Loading...
