Delphi DS100E User Manual

24
Freeze frame data.
This function allows the display of the data in real time
measured by the selected ECU. The value is illustrated along
with its PID reference, its name, the measured value, its unit
e.g. degrees and the manufacturers value for comparison.
Use the arrows to navigate between screens.
Oxygen Sensors
This function enables you to obtain the values of
each lambda. Probe. The EOBD functions with two probes,
per and post catalyst, for the control of pollution in the
exhaust gas. Each probe can be selected and controlled
independently.
On some vehicles the oxygen sensor information can be
found under “non-continuous tests”

Delphi DS100E Specifications

General

Protocols	CAN, ISO9141, KWP2000, PWM, VPW
Connectivity	Bluetooth or USB
Operating System	Windows
Memory	Dependent on connected device
Operating Temperature	50°C